KTM 85 SX 2019 User Manual

TUNING THE ENGINE 15
101
401951-10
–
Clean gear teeth
A
of the shift lever and shift shaft.
– Mount the shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw
1
with washers.
Guideline
Screw, shift
lever
M6 14 Nm (10.3 lbf ft)
Loctite
®
243™

KTM 85 SX 2019 Specifications

General

Engine Type	1-cylinder, 2-stroke engine
Displacement	84.9 cm³
Starter	Kickstarter
Transmission	6-speed
Cooling	Liquid cooled
Front Brake	Disc brake
Rear Brake	Disc brake
Front Brake Diameter	240 mm
Bore x Stroke	47 mm x 48.95 mm
Frame Design	Central tube frame, chrome molybdenum steel
Front Suspension	WP XACT 43
Rear Suspension	WP XACT Monoshock with linkage
Front Tire	70/100-19"
Rear Tire	90/100-16
Wheelbase	1, 290 mm ± 10 mm
Fuel Tank Capacity	5.2 liters