KTM Adventure 1090 2017 User Manual

2 SETUP 5
F01015-10
–
Mount rubber dampers
5
on the engine guard.
– Position the engine guard. Mount and tighten the screws with the distance sleeves.
Guideline
Screw, engine guard M6 10 Nm (7.4 lbf ft)
– Remove the seat. ( p. 6)
– Remove spare key and KEYCODECARD under the seat and keep in a safe place for
the handover.
– Recharge the battery. ( p. 6)
– Remove the remaining films.
– Check the headlight setting. ( p. 9)
– Refuel. ( p. 12)
– Prepare the vehicle according to the specifications in the KTM Dealer.net for han-
dover to the customer.

KTM Adventure 1090 2017 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1050 cc
Bore x Stroke	103 mm x 63 mm
Transmission	6-speed
Front Suspension	WP USD Ø 48 mm
Fuel Capacity	23 liters
Dry Weight	205 kg
Tires Front	110/80 R 19
Tires Rear	150/70 R 17
Power	125 hp (92 kW)
Torque	109 Nm
Fuel System	Electronic fuel injection
Rear Suspension	WP monoshock
Front Brake	2 x 320mm Brembo discs, 4-piston radial calipers
Rear Brake	Single 267 mm disc, 2-piston caliper
ABS	Bosch 9M+ two-channel ABS
Seat Height	850 mm