KTM RC 390 User Manual

12 SERVICE WORK ON THE CHASSIS 88
L02150-10
Main work
–
Loosen nut

.
–
Loosen nuts

.
–
Adjust the chain tension by turning adjusting screws

on the left and right.
Guideline
Chain tension 5… 7 mm (0.2… 0.28 in)
Turn the adjusting screws

on the left and right so that the markings on the
left and right chain adjusters

are in the same position relative to the reference
marks

. The rear wheel is then correctly aligned.
Info
The upper chain section must be taut.
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten nuts

.
–
Make sure that chain adjusters

are fitted correctly on adjusting screws

.
–
Tighten nut

.
Guideline
Nut, rear wheel spindle M14x1.5 90 Nm
(66.4 lbf ft)

KTM RC 390 Specifications

General

Brand	KTM
Model	RC 390
Category	Motorcycle
Language	English