KTM SX-E 5 User Manual

3 WORK
14
M01675-10
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Mount the seat. ( p. 14)
3.13 Removing the seat
H00066-10
–
Open quick release
1
and raise the rear of the seat.
– Pull back the seat and remove it.
3.14 Mounting the seat
M01684-10
–
Hook the seat onto holding lug
1
, lower the seat at the rear,
and push it forward.
Holding lug
2
hangs on the front fairing.
H00066-11
–
Close quick release
3
.

KTM SX-E 5 Specifications

General

Rated Output	2 kW
Max Output	5 kW
Battery Capacity	907 Wh
Charging Time 100%	70 minutes
Front Suspension	XACT 35 WP Upside-Down fork, Ø 35 mm
Seat Height	665 mm
Chain	1/2 x 3/16"
Max Power	5 kW
Transmission	Single-speed automatic
Motor Type	Permanent magnet synchronous motor
Charging Time 80%	45 minutes
Rear Suspension	WP Monoshock
Front Brake	Disc brake 160 mm
Rear Brake	Disc brake 160 mm
Wheelbase	1032 mm
Frame	Central Tube Frame, Chrome Molybdenum Steel