WORK 3
15
3.15 Unlocking procedure for the battery management system
M01769-51
– Connect the diagnostics tool and start it.
– Select the vehicle in the diagnostics tool.
– Ensure external power supply for VCI using 12-V battery.
– Connect battery charger to the 12-V battery.
– Execute "Battery management system" > "Functions" > "Activate/deactivate transport mode".
– Clear the fault memory using the KTM diagnostics tool.
– Read out the fault memory using the KTM diagnostics tool.
» When fault memory is empty:
work is complete.
3.16 Positioning the battery charger
Warning
Risk of injury If the battery charger is used incorrectly, its intrinsic safety cannot be guaranteed.
The battery charger is only suitable for use with a Powerpack.
– Only use the battery charger with a Powerpack.
– Only operate the battery charger using household sockets with a ground conductor.
– Do not use any additional adapters or extensions.
– Follow the applicable safety instructions of the power connection.
To Next Page
Loading...
Need help?
General
