Kubota B1620 User Manual

OPERATING THE ENGINE12
A The PTO gear shift lever shifts to the (A) position only
when the PTO restricting plate is in "RELEASE"
position.
3. Place the PTO gear shift lever in
"NEUTRAL" position.
(1) PTO gear shift lever (A) Rear PTO "2nd"
Mid PTO "ON"
(B) Rear PTO "1st"
Mid PTO "OFF"
(N) "NEUTRALPOSITION"
4. Place the main gear shift lever in
"NEUTRAL" position.
(1) Main gear shift lever (N) "NEUTRAL POSITION"
5. Place the hydraulic control lever in
"DOWN" position.
(1) Hydraulic control lever (A) "DOWN"
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever "INCREASE"
"DECREASE"

Kubota B1620 Specifications

General

Engine Type	Diesel
Cylinders	3
Fuel Type	Diesel
Hydraulic System Type	Open center
Drive	4WD
3-Point Hitch Category	Category I