19OPERATING THE TRACTOR
[Type : SEARS 607]
C Travel adjustment
Pull the travel adjust lever and slide the seat backward or
forward, as required. The seat will lock in position when
the lever is released.
C Suspension adjustment
Turn the suspension adjust knob to achieve the optimum
suspension setting.
C Height adjustment
Turn the height adjust knob to desired position while
sitting in the seat.
A After adjusting the operator's seat, be sure to check to
see that the seat is properly locked.
BSeat Belt
To avoid personal injury:
A Always use the seat belt when the ROPS is
installed.
A Do not use the seat belt if a foldable ROPS is
down or there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is auto-locking retractable type.
BHead Light Switch
Turn the light switch clockwise, and the following lights are
activated on the switch position.
(1) Travel adjust lever
(2) Suspension adjust knob
(3) Height adjust knob
(4) Indication of suspension
(A) To decrease tension
(B) To increase tension
(C) "RAISE"
(D) "LOWER"
(1) Seat belt
2. Selecting light switch positions.
(1) Head light switch
To Next Page
Loading...
Need help?
General
