EasyManuals Logo
Home>Kubota>Tractor>B2301

Kubota B2301 User Manual

Kubota B2301
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
13OPERATING THE ENGINE
For the appropriate preheating time, refer to the table
below:
A Glow plug indicator (5) comes on while engine is being
preheated.
A Because of the safety devices, the engine will not start
except when the PTO clutch lever is placed in the
"OFF" position and speed control pedal is placed in the
"NEUTRAL" position.
C Cold Weather Starting
When the ambient temperature is below -5 (23 ) and
the engine is very cold. If the engine fails to start, turn off
the key for 30 seconds. Then repeat steps 8 and 9. To
protect the battery and the starter, make sure that the
starter is not continuously turned for more than 10
seconds.
BBlock Heater (Option)
A block heater is available as an option from your dealer.
It will assist you in starting your tractor when the ambient
temperature is below -15 (5 ).
If any lamps stays on, immediately stop the engine and
determine the cause.
STOPPING THE ENGINE
A If key does not stop the engine, consult your local
KUBOTA Dealer.
8. Turn the key to "PREHEAT" position
and hold it for about 2 to 3 seconds.
Temperature Preheating Time
Over 0 C (32 F) 2 to 3 sec.
0 to -5 C (32 to 23 F) 5 sec.
-5 to -15 C (23 to 5 F) 10 sec.
9. Turn the key to "START" position and
release when the engine starts.
10. Check to see that all the lamps on the
Easy Checker (TM) are "OFF".
1. After slowing the engine to idle, turn the
key to "OFF".
2. Remove the key.

Table of Contents

Other manuals for Kubota B2301

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota B2301 and is the answer not in the manual?

Kubota B2301 Specifications

General IconGeneral
BrandKubota
ModelB2301
CategoryTractor
LanguageEnglish

Related product manuals