Kubota B2301 User Manual

31PTO
BPTO Clutch Lever
1. The PTO clutch lever engages or disengages the PTO
clutch which gives the PTO independent control.
2. Shift the lever to "ON" to engage the PTO clutch. Shift
the lever to "OFF" to disengage the PTO clutch.
A To avoid shock loads to the PTO, reduce engine
throttle from high idle to low idle by pushing up on
engine throttle when engaging the PTO, then open the
throttle to the recommended engine rpm.
A To avoid damage to PTO clutch and implement, shift
the PTO clutch lever slowly, when engaging the PTO
clutch. Do not keep the PTO clutch lever half way.
A To avoid damage of transmission, when PTO select
lever is not smoothly shifted, slightly shift PTO clutch
lever.
A To avoid damage of transmission, do not shift PTO
select lever until the PTO has stopped completely.
A Tractor engine will not start if the PTO clutch lever is in
the engaged "ON" position.
A When you stand up from the seat with the PTO clutch
lever in the "ON" position, the engine will stop
regardless of the position of the PTO select lever.
This is because the tractor is equipped with Operator
Presence Control system (OPC).
BStationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brake.
2. Make sure the shift levers are at NEUTRAL, and start
the engine.
3. Set the PTO select lever to rear only position.
4. Set the PTO clutch lever to engage "ON".
5. Set the engine speed to provide recommended rear
PTO speed.
6. Get off the tractor and place blocks at the tires.
A If the PTO system is engaged and you stand up from
the seat and release the parking brake, the engine
stops automatically after standing up.
(1) PTO clutch lever "ON" "ENGAGE"
"OFF" "DISENGAGE"
(1) Parking brake lever (A) Interlock the brake pedals
(B) "DEPRESS"
(C) "PULL DOWN"
(1) PTO clutch lever
(2) PTO select lever
"ON"
"OFF"

Kubota B2301 Specifications

General

Brand	Kubota
Model	B2301
Category	Tractor
Language	English