Kubota B2320 User Manual

13OPERATING THE ENGINE
A The speed control pedal automatically returns to
neutral when the operator's foot is released from the
pedal.
3. [HST Type]
Place the speed set lever in "OFF"
position.
Place the speed control pedal in
"NEUTRAL" position.
Place the range gear shift lever (L-M-H)
in "NEUTRAL" position.
(1) Range gear shift lever
(L-M-H)
(2) Speed set lever
(3) Speed control pedal
(A) "OFF"
(B) "ON"
(H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"
[Manual Transmission Type]
Place the main gear shift lever in
"NEUTRAL" position.
(1) Main gear shift lever
4. Lock the loader control lever in
"NEUTRAL" position. (if equipped)
(1) Loader control lever
(2) Lock lever
(A) "LOCK"
5. [Except B2320DTN, B2320HSDN]
Place the hydraulic control lever in
"NEUTRAL" position.
(1) Hydraulic control lever (A) "DOWN"
(B) "SLOW DOWN"
(N) "NEUTRAL"
(C) "SLOW UP"
(D) "UP"

Kubota B2320 Specifications

General

Engine Power	23 hp
Transmission Type	Hydrostatic
PTO Power	17.5 hp
Fuel Capacity	6.6 gallons
Wheelbase	61.5 inches
Type	Compact Utility Tractor
PTO Speed	540 RPM
Hydraulic System Type	Open center
Tire Size (Front)	6-12
Tire Size (Rear)	9.5-16
Engine Type	Diesel
Weight	1, 433 lbs (650 kg)