Kubota LA853 - Operating the Loader; Bucket Operations

OPERATING
THE
LOADER
12
OPERATING
THE LOADER
The
loader
should be operated
with the
tractor
engine
speed depending
on the
application and the
operator's
level
of experience. Excessive
speeds
are dangerous,
and may
cause bucket
spillage and unnecessary
strain on
the tractor
and loader.
When
operating in
temperatures
below
-'1
'C
(30 "F
),
run
the
tractor
engine below 1200
rpm
until the
oil
temperature
exceeds
-1 'C (30'f
).
The following
text and illustrations
offer suggested
loader
and tractor
operating techniques.
A
CAUTION
To reduce
the
possibility
of roll
over:
a
lt is
not recommended
that the loader
be
attached
when
operating another
implement
on
,
^
hillside.
IMPORTANT:
t
When
operating
the loader in
rough
terrain,
remove
the
mower
to
avoid damage
to the mower.
FILLING
THE
BUCKET
Approach
and enter
the
pile
with
a level
bucket
Ease
control lever
toward
you
and then back
to
rollback
and
lift
the
bucket.
The rollback
and lifting
of the
bucket will increase
efficiency
because
a level
bucket throughout
the lifting
cycle resists
bucket lift
and increases
breakaway
effort.
NOTE:
.
Do not
be
concerned if
the bucket is
not completely
filled
during
each
pass.
Maximum
productivity
is
determined
by the
amount
of material loaded
in
a
given period
of time.
Time is
lost if
two or more
attempts
are made
to fill
the bucket
on each
pass.