17OPERATING THE GENERATOR
STOPPING THE ENGINE
1. Turn OFF all electrical device switches
for connected loads.
A For the AUS models, also turn OFF the load center
circuit breaker.
2. Turn OFF the circuit breakers.
3. Allow the engine to run with no load for
about 5 minutes before stopping the
engine completely.
4. Turn the main switch (key) to the "OFF"
position.
5. Turn the fuel lever to the "CLOSE"
position.
(1) Circuit breaker (A) "OFF"
(1) Main switch (Key) (A) "OFF"
(1) Fuel lever
(2) Filter bowl
(A) "CLOSE"
1G296-8914.book 17 ページ ２０１２年３月１９日 月曜日 午前１０時４０分
To Next Page
Loading...
Need help?
General
