17OPERATING THE MACHINE
STARTING
BSeat
To avoid personal injury:
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the machine.
[T1880]
The operator's seat position can be adjusted forward and
rearward. Loosen the seat adjustment knob, slide the seat
to the desired position and then retighten the knob.
[T2080, T2380]
The operator's seat position can be adjusted forward and
backward by pulling the seat sliding lever.
BLight Switch
Pushing the light switch upward illuminates the headlights
and pushing it downward turns the lights off.
BLift Lever
The lift lever is used to raise and lower the mower deck.
To raise the mower deck, lift the lever slightly, then push
the button at the top of the lift lever, and pull the lever
upward.
To lower the mower deck, lift the lever slightly, then push
the button at the top of the lift lever, hold the button in and
lower the lever down.
1. Adjust the operator's position.
(1) Seat adjustment knob
(1) Seat sliding lever
2. Select Light Switch Positions.
(1) Light switch : "ON"
: "OFF"
3. Raise the implement.
(1) Lift Lever
(2) Button
"RAISE"
"LOWER"
To Next Page
Loading...
Need help?
General
