EasyManuals Logo

Kubota V3300-E User Manual

Kubota V3300-E
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
19PERIODIC SERVICE
ENGLISH
[V3300-E, V3300-TE, V3300-DI-E, V3300-DI-TE,
V3800-DI-E, V3800-DI-TE, V3300-EBG, V3300-T-EBG]
5. After the new cartridge is replaced, the engine oil
level normally decreases a little. Thus, run the
engine for a while and check for oil leaks through the
seal before checking the engine oil level. Add oil if
necessary.
A Wipe off any oil sticking to the machine completely.
RADIATOR
Coolant will last for one day's work if filled all the way up
before operation start. Make it a rule to check the
coolant level before every operation.
WARNING
To avoid personal injury:
A Do not stop the engine suddenly.
Stop it after about 5 minutes of
unloaded idling.
A Work only after letting the engine
and radiator cool off completely
(more than 30 minutes after it is
stopped).
A Do not remove the radiator cap
while coolant is hot. When the
radiator cools down enough to be
touched, rotate cap to the first stop
to allow excess pressure to escape.
Then remove cap completely.
If overheats should occur, steam
may gush out from the radiator or
recovery tank; Severe burns could
result.
(1) Oil filter cartridge
"Remove with a filter wrench
(Tighten with your hand)"

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota V3300-E and is the answer not in the manual?

Kubota V3300-E Specifications

General IconGeneral
BrandKubota
ModelV3300-E
CategoryEngine
LanguageEnglish

Related product manuals