Kubota WSM ZD321 User Manual

2-S36
ZD321, ZD326, ZD331, WSM
TRANSAXLE
Pump Shaft
1. Check the bearing surface (3) and the ball bearing (2).
2. If the shaft is rough or grooved, replace it.
3. If the ball bearing is worn, replace it.
W1038908
Bush and Needle Bearing
1. Check the bush (1) for wear.
2. If the bush is worn or damaged, replace it.
3. Check the needle bearing (2) for wear.
4. If the needle bearing is worn or damaged, replace it.
W1039153
(1) Pump Shaft
(2) Ball Bearing
(3) Bearing Surface
(1) Bush (2) Needle Bearing
KiSC issued 04, 2007 A

Kubota WSM ZD321 Specifications

General

Fuel Type	Diesel
Engine Type	Diesel
Transmission	Hydrostatic
Cutting Width	60 inches
Type	Zero-Turn Mower
Turning Radius	Zero turn