EasyManuals Logo
Home>Kubota>Lawn Mower>WSM ZD321

Kubota WSM ZD321 User Manual

Kubota WSM ZD321
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
G-21
ZD321, ZD326, ZD331, WSM
G GENERAL
[5] CHECK POINTS OF EVERY 50 HOURS
Checking Safety Device
CAUTION
To avoid personal injury:
Do not allow anyone near the machine while testing.
If the machine does not pass one of the following tests, do
not operate the machine.
Sit on operator’s seat for all tests except for Test 1.
Test 1 (OPERATOR NOT ON THE SEAT)
1. Securely set the parking brake.
2. Shift the PTO lever (4) to “DISENGAGE” (OFF) position.
3. Set the motion control levers (3) to the “NEUTRAL LOCK”
position.
4. Turn the key switch (3) to “START” position.
5. The engine must not crank.
Test 2 (OPERATOR ON THE SEAT)
1. Do not set the parking brake. (Release it from test 1.)
2. Shift the PTO lever (4) to “DISENGAGE” (OFF) position.
3. Set the motion control levers (2) to the “NEUTRAL LOCK”
position.
4. Turn the key switch (3) to “START” position.
5. The engine must not crank.
Test 3 (OPERATOR ON THE SEAT)
1. Securely set the parking brake.
2. Shift the PTO lever (4) to “DISENGAGE” (OFF) position.
3. Grasp the motion control levers (2) and move then inward from
“NEUTRAL LOCK” position to “NEUTRAL” position and then
release the levers.
4. Turn the key switch (3) to “START” position.
5. The engine must not crank.
Test 4 (OPERATOR ON THE SEAT)
1. Securely set the parking brake.
2. Shift the PTO lever (4) to “ENGAGE” (ON) position.
3. Grasp the motion control levers (2) to the “NEUTRAL LOCK”
position to “NEUTRAL” position.
4. Turn the key switch (3) to “START” position.
5. The engine must not crank.
Test 5 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Keeps the parking brake securely set.
3. Shift the PTO lever (4) to “DISENGAGE” (OFF) position.
4. Grasp the motion control levers (2) and move then inward from
“NEUTRAL LOCK” position to “NEUTRAL” position and then
release the levers.
5. The engine must shut off after a short time delay.
IMPORTANT
For this test only, the engine will shut off in a few seconds.
W1050412
(1) Parking Brake Lock Pedal
(2) Motion Control Lever
(3) Key Switch
(4) PTO Lever
KiSC issued 04, 2007 A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota WSM ZD321 and is the answer not in the manual?

Kubota WSM ZD321 Specifications

General IconGeneral
BrandKubota
ModelWSM ZD321
CategoryLawn Mower
LanguageEnglish

Related product manuals