TO THE READER
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of ZD321, ZD326 and ZD331.
It is divided into three parts, "General", "Mechanism" and "Servicing".
■ General
Information on the product identification, the general precautions, maintenance
check list, check and maintenance and special tools are described.
■ Mechanism
Information on the construction and function are included. This part should be
understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Workshop Manual Diesel Engine, Mechanism (Code No. 9Y021-01874) for
the one which has not been described to this workshop manual.
■ Servicing
Information on the troubleshooting, servicing specification lists, tightening torque,
checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have
not been specified as one model.
December 2006
© KUBOTA Corporation 2006
To Next Page
Loading...
Need help?
General
