2-M11
ZD321, ZD326, ZD331, WSM
TRANSAXLE
(8) Parking Brake
The parking brake is composed of brake pedal (1), parking lock pedal (2), brake pedal return spring (3), brake shaft
(4), brake rods (5), brake arms (7) and brake assemblies (6).
The brake is mechanical wet disks type.
When the brake pedal (1) is pressed, the brake shaft (4) is rotated forward and the brake rods (5) is pulled forward.
And the brake arms (7) are rotated forward.
The brake arms (7) is connected mechanically to the grooves of the actuators (10).
The brake arms (7) rotates the actuators (10) and the actuators (10) mounting on three balls pushes the brake disks
(11) and brake plates (12) to stop the brake shafts rotation.
As both the brake pedal (1) and parking lock pedal (2) are pressed, the parking brake will be applied and locked.
(1) Brake Pedal
(2) Parking Lock Pedal
(3) Brake Pedal Return Spring
(4) Brake Shaft
(5) Brake Rod
(6) Brake Assembly
(7) Brake Arm
(8) Brake Spring
(9) Ball
(10) Actuator
(11) Brake Disk
(12) Brake Plate
(13) HST Motor Shaft (Brake)
To Next Page
Loading...
Need help?
General
