Kubota ZD21F - 5. CHECKING, DISASSEMBLING AND SERVICING; [1] SEPARATING ENGINE

1-S19
ZD18(F) · ZD21(F) · ZD28(F), WSM
ENGINE
5. CHECKING, DISASSEMBLING AND SERVICING
[1] SEPARATING ENGINE
(1) Disassembling and Assembling
Draining Engine Oil
1. Park the machine on level ground.
2. Start and warm up the engine for approx. 5 minutes.
3. Place an oil pan underneath the engine.
4. Remove the drain plug (1) to drain oil.
5. After draining, screw in the drain plug (1).
(When refilling)
• Fill the engine oil up to the upper line on the dipstick (3).
IMPORTANT
• Never mix two different type of oil.
• Use the proper SAE Engine Oil according to ambient
temperatures.
Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page
G-7.)
W1019220
Engine oil Capacity
D722
(ZD18(F))
3.2 L
3.4 U.S.qts.
2.8 Imp.qts.
D782
(ZD21(F))
3.5 L
3.7 U.S.qts.
3.1 Imp.qts.
D1105
(ZD28(F))
3.4 L
3.6 U.S.qts.
3.0 Imp.qts.
(1) Drain Plug
(2) Oil Inlet Plug
(3) Dipstick
(A) Upper Level
(B) Lower Level
KiSC issued 04, 2009 A