SEAT LOCK / MET-IN BOX (UNDERSEAT STORAGE)
• Unlock the seat – you can store your helmet in the met-in box
(under seat storage)
• To unlock: Stop the engine and turn the ignition switch key to
the “OFF” position. Insert the ignition switch key into the seat
lock and turn it clockwise.
• To lock the seat, push down on it and it will lock automatically.
Make sure the seat is secure before riding
- 14 -
Never put the key inside the seat cushion to lock the seat.
HELMET HOLDER
1. Open the seat using the ignition switch key (see above) and lift seat.
2. Put the helmet retaining ring into the helmet holder
3. Put the seat down and it will lock automatically
To take the helmet out, reverse the order of the above instructions.
When riding be sure you are wearing the helmet and that
it is not still on the scooter. The helmet may interfere
with the safe operation and could result in a loss of control.
To Next Page
Loading...
Need help?
General