- 25 -
BRAKE FLUID LEVEL INSPECTION
• Check through the inspection window to see if the fluid
level is below the lower level mark.
• As the brake pads wear, brake fluid levels drop, automatically
compensating for the wear. There are no adjustements to
perform, but fluid level and pad wear must be inspected
regularly. To ensure that there are no fluid leaks, inspect
frequently.
• If the brake lever travel becomes excessive and the brake pads
are not warn beyond the recommended limit, there may be air
in the brake system and it must be bled. See your authorized
KYMCO dealer for this service.
• To prevent damage to the brake system, use only fluid from a
sealed container. Never allow contaminents (dirt, water, etc.) to
enter the brake fluid reservoir.
• Brake fluid can damage paint and plastic, therefore, handle the
fluid with care. When adding brake fluid, be sure the reservoir is
horizontal before removing the cover to prevent accidental spillage.
• Use only DOT 4 brake fluid from a sealed contariner.
To Next Page
Loading...
Need help?
General