5. ENGINE STARTING METHODS
TURN THE IGNITION SWITCH “ON”
• Unlock the steering handlebar
• Turn the ignition switch to the “ON” position
- 31 -
• Check the gasoline volume and engine oil level before starting
the engine.
• Be sure that both the centre and side stands are up before
starting the engine.
LOCK THE REAR WHEEL
• Apply the brake lever to connect the power for starting.
t from
underneath you at high speed, make sure to lock the rear
• In order to prevent the scooter from rushing ou
wheel.
• If there is excessive brake lever free play, the bike may
nce loss of braking power.
experie
To Next Page
Loading...
Need help?
General