KYMCO Agility City 50 User Manual

(3) BRAKE INSPECTION(3) BRAKE INSPECTION
Ride the motorcycle at low speed on a dry road and
respectively apply the front brake lever and rear brake
pedal to check the brake performance.
The brake lever should have proper free play.
"Free play" means the distance from the position of
loose brake to the position of fully applied brake.
Measure the free play at the brake lever end and check if
it is within the specified value of (1-2cm rear brake).
Ride the motorcycle at low speed on a dry road and
respectively apply the front brake lever and rear brake
pedal to check the brake performance.
The brake lever should have proper free play.
"Free play" means the distance from the position of
loose brake to the position of fully applied brake.
Measure the free play at the brake lever end and check if
it is within the specified value of (1-2cm rear brake).
(4) TIRE INSPECTION(4) TIRE INSPECTION
1. TIRE PRESSURE CHECK 1. TIRE PRESSURE CHECK
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire pressure
with a tire pressure gauge.
Measure the tire pressure under room temperature.
2
The tire pressure must not overpass 2.50kg/cm
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire pressure
with a tire pressure gauge.
Measure the tire pressure under room temperature.
The tire pressure must not overpass 2.50kg/cm
2
⌒11⌒⌒11⌒
1-2cm

KYMCO Agility City 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Fuel Capacity	6.5 liters
Seat Height	810 mm
Ignition	CDI
Starter	Electric & Kick
Length	2, 050 mm
Width	735 mm
Wheelbase	1, 340 mm
Engine Type	4-stroke, SOHC
Transmission	CVT
Rear Suspension	Single shock