⌒18⌒⌒18⌒
5. ENGINE STARTING METHODS5. ENGINE STARTING METHODS
(1) TURN THE IGNITION SWITCH "ON"(1) TURN THE IGNITION SWITCH "ON"
Unlock the steering handlebar.
Turn the ignition switch to the "ON" position.
Unlock the steering handlebar.
Turn the ignition switch to the "ON" position.
Check the gasoline volume and engine oil level before
starting the engine.
Be sure to erect the main stand while starting the engine.
Before starting the engine,the side stand shall be kicked
up to secure safety.
Check the gasoline volume and engine oil level before
starting the engine.
Be sure to erect the main stand while starting the engine.
Before starting the engine,the side stand shall be kicked
up to secure safety.
(2) LOCK THE REAR WHEEL(2) LOCK THE REAR WHEEL
Apply the rear brake lever to connect the power for starting.
Apply the rear brake lever to connect the power for starting.
CAUTION: CAUTION:
CAUTION: CAUTION:
In order to prevent the motorcycle from rushing out at high
speed, make sure to lock the rear wheel.
If free play of the rear brake lever is incorrect,the rear
wheel cannot be braked and it will cause danger easily.
In order to prevent the motorcycle from rushing out at high
speed, make sure to lock the rear wheel.
If free play of the rear brake lever is incorrect,the rear
wheel cannot be braked and it will cause danger easily.
To Next Page
Loading...
Need help?
General