KYMCO Agility City 50 User Manual

⌒32⌒⌒32⌒
(6) ENGINE OIL CHANGE(6) ENGINE OIL CHANGE
1.Place the motorcycle on its main stand on level ground.
2.Remove the oil dipstick.
3.Remove the drain bolt to drain the oil.
4.Refill fresh engine oil for 50:0.8/125:0.9 liter. Firmly
tighten the oil dipstick.
5.Warm up the engine and check the oil level again after the
engine is stopped for 20-30 seconds.
Specified Oil: SAE 15W-40
API service classifcation: SG
Capacity/Exchanging Capacity:
1.Place the motorcycle on its main stand on level ground.
2.Remove the oil dipstick.
3.Remove the drain bolt to drain the oil.
4.Refill fresh engine oil for 50:0.8/125:0.9 liter. Firmly
tighten the oil dipstick.
5.Warm up the engine and check the oil level again after the
engine is stopped for 20 30 seconds.
Specified Oil: SAE 15W-40
API service classifcation: SG
Capacity/Exchanging Capacity:
-
When changing the engine oil, also clean the oil strainer
and reinstall it.
Use the specified engine oil.
Change engine oil at first 300km and then change it at
every 2000km.
Engine oil will deteriorate easily and require more frequent
change if the motorcycle is often ridden in dusty and cold
areas or ridden for short distance.
Do not mix engine oil of different classes or viscosities. It
may cause damage for engine.
When changing the engine oil, also clean the oil strainer
and reinstall it.
Use the specified engine oil.
Change engine oil at first 300km and then change it at
every 2000km.
Engine oil will deteriorate easily and require more frequent
change if the motorcycle is often ridden in dusty and cold
areas or ridden for short distance.
Do not mix engine oil of different classes or viscosities. It
may cause damage for engine.
CAUTION: CAUTION:
Drain boltDrain bolt
SUPER8 50:0.8/0.7L
SUPER8 125:0.9/0.8L
SUPER8 50:0.8/0.7L
SUPER8 125:0.9/0.8L

KYMCO Agility City 50 Specifications

General

Brand	KYMCO
Model	Agility City 50
Category	Scooter
Language	English