KYMCO Dink-R125 User Manual

MAINTENANCE
When frequent fuse failures occur, it usually
indicates a short circuit or an overload in the
electrical system.
1.Turn Main switch off, check for blown Fuse.
2.Only replace with a fuse of specified
capacity.
3.Identify the cause of a blown fuse before
replacing it.
Fuse(Dink-R 150)
WARNING
Never use a fuse with a different rating
from that specified. Serious damage to
the electrical system or a fire may result,
causing a dangerous loss of lights or
engine power.
Good
Blown
Fuses list
All functional fuses are located in the fuse
box, there's a sticker on the back of the fuse
box cover. Fuse should be inserted according
to this sticker.
MAIN(10A): FR/RR turn signal, Stop light,
Horn, Meter, position light, DC power socket,
Oil controller lamp
ING/FAN(10A): ABS (IGN), Fan, Fan relay,
Starter relay, Head light, Light controller
ABS(25A): ABS MOTOR (M+12V)
CHARGE(30A): Charging, Keyless, Hazard
control unit,
FI(5A): ECU Relay
ECU(10A): ABS ECU(ECU +12V)
Luggage Box Light, Clock.
CAUTION
●
●
●
Only replace electrical devices (lights,
meters) with ones of specified ratings.
If using an inadequate fuse, it may be
blown easily or battery loading may
become imbalance.
Avoid frontal strong water jet when
cleaning the scooter.
58

KYMCO Dink-R125 Specifications

General

Brand	KYMCO
Model	Dink-R125
Category	Motorcycle
Language	English