EasyManuals Logo
Home>KYMCO>Motorcycle>Dink-R125

KYMCO Dink-R125 User Manual

KYMCO Dink-R125
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
MAINTENANCE
Take necessary steps to be in good condition for
next use after long storage.
Perform any necessary periodic maintenance or
repairs before storage
Exchange new oil after warming up the engine.
Empty the fuel tank and make sure no fuel
remaining by idling until the engine stalls.
Remove the battery and keep from direct
sunlight or freezing temperature, it's better to do
a slow charge once a month.
Wash and dry the vehicle thoroughly.
Apply corrosion inhibitor to all unpainted metal.
Inflate all tires to the rated pressure and put the
wheel stands to raise tires off the ground.
Cover the vehicle, store indoors and keep dry.
Storage
Removal from Storage
Remove cover from the vehicle
Check the battery voltage or charge it if
necessary, and then install it in the vehicle.
Fill the fuel tank with fuel.
Check all the points listed in the Pre-ride
Inspection section.
WARNING
1.Gasoline is easily flammable and
explosive. It's possible to get burned,
even seriously injured when fueling
with carelessness.
2.Stop the engine and keep away from
any heat source, spark fire, and flames.
3.Be sure to add fuel outdoors and wipe
the spill up at once.
66

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO Dink-R125 and is the answer not in the manual?

KYMCO Dink-R125 Specifications

General IconGeneral
BrandKYMCO
ModelDink-R125
CategoryMotorcycle
LanguageEnglish

Related product manuals