71
GENERAL MAINTENANCE
Be careful not to spill any fluid when filling the brake fluid
reservoir. Brake fluid can damage the finish of plastic parts,
so wipe away spilled fluid immediately.
BRAKE FLUID - LEFT HAND BRAKE
Check the fluid level in the brake fluid reservoir sight glass. If
the level in the sight glass 1 is not visible, add DOT 4 brake
fluid to set the level between the “L” and “F” marks.
11
11
1
L
F
Parking Brake (Brake Lever Lock)
Check to make sure the parking brake lock functions properly and
that the brake (when engaged) locks the wheels.
NOTE: The parking brake (lever lock) must lock the wheels.
If it doesn't, take your ATV to an authorized KYMCO ATV
dealer for service.
1. Squeeze the right hand brake lever two or three times
2. Depress and hold the brake lever lock
3. Attempt to push the ATV
Right front hand
brake lever
Parking brake
(lever lock)
Be sure to inspect the rear brake system before each ride.
Maintain the brakes according to the Maintenance Schedule.
REAR FOOT BRAKE
Your ATV's rear foot brake must be maintained periodically to
remain fully functional.
1. Check the fluid level in the rear brake fluid reservoir. The fluid
level must be maintained between the MAX and MIN level
marks. If the level in the reservoir is low, add DOT 4 brake fluid.
NOTE: The brake fluid reservoir
is located under the seat.
2. Press down on the rear brake pedal several times to check
for firmness
3. If the pedal response is not firm, the system must be bled
NOTE: Take your ATV to an authorized KYMCO ATV
dealer for any brake system fluid bleeding.
To Next Page
Loading...
Need help?
General
