124
I. Install right side cover.
J. Reinstall the drain plug and tighten the
drain plug to specification.
K. Add the specified amount of recommended
engine oil, and then install the engine oil
filler cap and tighten it.
Tightening torque:
Drain plug (engine):
25 N-m (2.5 kgf-m, 18 lbf-ft)
Recommended oil: see page 158.
Oil quantity: see page 158.
Be sure no foreign material enters the
crankcase.
CAUTION:
L. Start the engine and warm it up for several
minutes. While warming up, check for oil
leakage. If oil leakage is found, turn the
engine off immediately and check for the
cause.
M. Turn the engine off, and then check the oil
level through the inspection window (7)
and correct it if necessary.
(7) Engine oil inspection window
(7)
(7)
To Next Page
Loading...
Need help?
General
