1. Make sure there is no brake fluid leakage.
2. Check operation of the levers and pedal.
They should move smoothly and there should
be a firm feeling when the brake is applied. If
not, have the machine inspected by a
KYMCO dealer.
3. Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking
performance, inspect the brakes for wear.
FRONT AND REAR BRAKES
POTENTIAL HAZARD
Riding with improperly operating brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could
lead to an accident.
HOW TO AVOID THE HAZARD
Always check the brakes at the start of
every ride. Do not ride the ATV if you find
any problem with the brakes. If a problem
cannot be corrected by the adjustment
procedures provided in this manual, have
the ATV inspected by a KYMCO dealer.
WARNING
48
To Next Page
Loading...
Need help?
General
