KYMCO MXU 700i User Manual

139
BRAKE FLUID INSPECTION
Check if the fluid level is below the lower level
mark through the inspection window.
WARNING
(1) Lower level mark (Hand brake lever)
L
(1)
REAR BRAKE PADS
The clearance between the brake pads and brake
discs is adjusted automatically as the pads wear.
The only maintenance that is required is to replace
brake pads when they become worn.To check the
thicknessof the brakepads use thisprocedure.
1.Remove a rear wheel.
2.Measure the thickness of each brake pad.
If the thickness of less than1.0mm(0.039in),take
your ATV to a KYMCO dealer to have brake pads
replaced.
3.Reinstall the wheel and tighten the lug nuts to
61N-m.
(2)
11
11
(1) Brake pad wear limit:
1mm(0.039in)
brakes(2) Rear

KYMCO MXU 700i Specifications

General

Brand	KYMCO
Model	MXU 700i
Category	Offroad Vehicle
Language	English