KYMCO MXU 700i User Manual

126
3. Remove the oil filler cap (2), then remove
the drain plug/washer.
4. After the oil has completely drained,
reinstall the drain plug/washer.
5. Fill the gear case with the recommended
oil.
Remove the oil level check bolt/washer
(2).
Make sure the oil level reaches the oil
level check hole.
6. Install the oil filler cap and oil level check
bolt.
Tightening torque
Drain plug: 20 N-m (2 kgf-m, 15 lbf-ft)
Recommended oil : SAE 80
Oil quantity :
Periodic oil change
0.23 L (0.20 lmp qt, 0.243 US qt)
Tightening torque:
Oil filler cap: 14.7 N-m (1.5 kgf-m, 11 lbf-ft)
Oil level check bolt:
20 N-m (2 kgf-m, 15 lbf-ft)
Be sure no foreign material enters the gear
case.
CAUTION:
(2) Oil filler cap
(3) Oil level check bolt/washer
(2)
(3)
7. Install the skid plate.

KYMCO MXU 700i Specifications

General

Brand	KYMCO
Model	MXU 700i
Category	Offroad Vehicle
Language	English