KYMCO MXU 700i User Manual

2. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level will vary with engine
temperature. The coolant level should be
between the maximum and minimum marks.
3. If the level is low, remove the coolant
reservoir cap, and then add coolant or distilled
water to raise it to the specified level.
4. If your ATV overheats, see for
details.
page 143
Hard water or salt water is harmful to the
engine. You may use distilled water if rou
can not get soft water.
CAUTION:
1. If water is added, have a KYMCO dealer
check the antifreeze content of the coolant
as soon as possible.
2. The radiator fan operation is completely
automatic. It is switched on or off according
to the coolant temperature in the radiator.
NOTE:
142
(1) Coolant reservoir cap
(2) Maximum level mark
(3) Minimum level mark
FULL
LOW
(1)
(2)
(3)

KYMCO MXU 700i Specifications

General

Brand	KYMCO
Model	MXU 700i
Category	Offroad Vehicle
Language	English