KYMCO PEOPLE 125 User Manual

12. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
12-5
PEOPL E 12 5/150
FRONT WHEEL BEARING
Remove the side collar and dust seal.
Turn the inner race of each bearing with your
finger to see if they turn smoothly and
quietly. Also check if the outer race fits
tightly in the hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.
BEARING REPLACEMENT
Remove the front wheel bearings and distance
collar.
Bearing Remover
Bearing Remover Head, 12mm
Pack all bearing cavities with grease.
Drive in the left bearing.
Install the distance collar.
Drive in the right bearing.
Driver handle A
• Do not allow the bearings to tilt
while driving them in.
• Drive in the bearing squarely
with the sealed end facing out.
＊
Wheel Bearing
Special
Special
Dust Seal
Side Collar
Bearing Remover
Driver Handle A
www.PlanDeGraissage.org

KYMCO PEOPLE 125 Specifications

General

Displacement	124.6 cc
Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Starter	Electric & Kick
Cooling System	Air Cooled
Transmission	Automatic CVT