KYMCO PEOPLE 125 User Manual

7. CYLINDER HEAD/VALVES
7-4
PEOPL E 12 5/150
CAMSHAFT REMOVAL
Remove the center cover.
Remove the four cylinder head cover bolts to
remove the cylinder head cover.
Remove the cam chain tensioner cap screw
and the O-ring.
Turn the cam chain tensioner screw clockwise
to tighten it.
Turn the flywheel counterclockwise so that
the “T” mark on the flywheel aligns with the
index mark on the crankcase to bring the
round hole on the camshaft gear facing up to
the top dead center on the compression
stroke.
Cylinder Head Cover
O-ring
Tensioner Screw
Round Hole
Camshaft Gear
Punch Marks
bolt
www.PlanDeGraissage.org

KYMCO PEOPLE 125 Specifications

General

Brand	KYMCO
Model	PEOPLE 125
Category	Motorcycle
Language	English