KYMCO PEOPLE 125 User Manual

7. CYLINDER HEAD/VALVES
7-5
PEOPL E 12 5/150
Remove the four cylinder head nuts and
washers.
Remove the camshaft holder and dowel pins.
Remove the camshaft gear from the cam chain
and remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
( 125 cc )
IN : 29.30mm replace if below
EX: 29.15mm replace if below
( 150 cc )
IN : 29.40mm replace if below
EX: 29.05mm replace if below
Cam Chain
Camshaft Gear
Camshaft Holder
Nut
Washer
Dowel Pins
Camshaft
Diagonally loosen the cylinder head nuts
in 2 or 3 times.
＊
www.PlanDeGraissage.org

KYMCO PEOPLE 125 Specifications

General

Displacement	124.6 cc
Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Starter	Electric & Kick
Cooling System	Air Cooled
Transmission	Automatic CVT