24
SECTION 3- OPERATION
Pre-ride inspection
For your safety, it is very important to spend a
few moments before each ride to walk around
the motorcycle and check its condition. If you
detect any problem, be sure to deal with it, or
have the KYMCO dealer to fix it.
3
4
5
6
WARNING
Improper maintenance of the motorcycle
or failure to solve a problem before
riding can cause a crash in which you
can be seriously hurt or killed. Always
perform a pre-ride inspection before
every ride and solve any problems.
1. Engine oil level:
Add engine oil if required.
Check if there's a kind of leakage.
2. Fuel level:
Fill fuel tank when necessary. Check if
there's a kind of leakage.
3. Front and rear brakes:
Check operation and make sure there is no
brake fluid leakage.
4. Tires:
Check condition and inflation pressure.
5. Throttle:
Check for smooth operation and that it can
be closed completely in all steering
positions.
6. Lights and horn:
Check that headlight, tail/brake light, turn
signals, indicators and horn function
properly.
7. Steering:
Check for condition and smoothness.
To Next Page
Loading...
Need help?
General
