- 29 -
9. EASY MAINTENANCE
(1)AIR CLEANER INSPECTION AND AIR
CLEANER CLEANING & REPLACEMENT
y Take out the air cleaner and visually check if it is
dirty or clogged.
1. Remove the screws attaching the air cleaner
cover and remove the air cleaner cover.
2. Remove the air cleaner element.
3. The installation sequence is the reverse of
removal.
y Clean the air cleaner element with compressed
air.
y Replace the air cleaner element at very 3000km.
y The air cleaner requires more frequent cleaning
or replacing when ridden in unusually dusty areas.
When replacing, refer to P37 Periodic Inspection
& Maintenance Schedule.
n CAUTION:
y Never use oil or solvent to wash the wet type
paper element.
y Be careful not to allow water to enter the air
cleaner; otherwise, it may result in hard starting.
y If the air cleaner is not installed properly, dust
may be sucked into the cylinder directly to reduce
engine horsepower and affect the service life of
engine.
(1)
(2)
To Next Page
Loading...
Need help?
General
