32
MAINTENANCE
Maintenance schedule
Perform the pre-ride inspection (see pages 16 - 23) at each scheduled maintenance period. This interval should be
judged by odometer reading or months, whichever comes first.
Maintenance schedule legend (see page 33):
I: INSPECT
AND CLEAN, ADJUST, LUBRICA
TE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE A: ADJUST L: LUBRICATE T: TIGHTEN
The maintenance schedule on page 35 specifies the maintenance required to keep your Sento 50 scooter in peak operating
condition. Maintenance work should be performed in accordance with KYMCO standards and specifications by properly trained
and equipped technicians. Your KYMCO dealer meets all of these requirements.
* Should be serviced by your KYMCO dealer, unless you have the proper tools, service data and are technically qualified.
* * In the interest of safety, we recommend these items be serviced only by your KYMCO dealer. KYMCO USA recommends
that your KYMCO dealer road test your scooter after each periodic maintenance service is completed.
Maintenance schedule notes (see page 33):
1. At higher odometer readings, repeat at the frequency interval listed here.
2. Service more frequently if the scooter is ridden in unusually wet or dusty areas.
3. Service more frequently when riding in rain or at full throttle.
4. “PRI” indicates that the item should be checked as part of the Pre-ride Inspection (see page 16 through 23)
5. “See page” indicates on which page of the Owner’s Manual you will find information about the required maintenance.
6. “Dealer” indicates maintenance or service procedure that should be performed by your KYMCO dealer.
To Next Page
Loading...
Need help?
General
