9-4
Maintenance
6 On the drum unit, slide the main charger cleaner (green)
back and forth 2 or 3 times to clean the charger wire,
then return it to its original position (CLEANER HOME
POSITION ).
IMPORTANT: Remove the fixing tape on the main charger
cleaner before cleaning for the first time.
After cleaning, make sure you restore the main charger
cleaner to its home position.
7 When cleaning is complete, return the drum unit to the
original position.
8 Return the developer unit to its position, aligning the
guides at both ends with the slots in the machine. Then,
close the front cover.
To Next Page
Loading...
Need help?
General