Device Settings
5
You can select No notification message for policy conflicts if you do not
want a message to appear when policy conflicts occur during printing. When
selected, choose a printing result:
Continue printing
Apply the policy and print the job
Cancel printing
Cancel the print job
6
A restricted user in a client/server environment can click Reset to change the
Login user name to the server’s Policy Manager user name.
7
Click OK in all dialog boxes.
Printing with Policy Manager
With Policy Manager set to on in the driver, you can send a private and secure
print job.
1
Print the document from the application. You can click Preferences or
Properties to open the Properties dialog box and view printing restrictions set
by the policy.
2
If the Policy Manager Login dialog box appears, enter a Login user name and
password. This dialog box is generated when an invalid or blank Policy
Manager user name or password is set in the driver. The Policy Manager
Login dialog box does not appear if Use Windows authentication is selected
in Administrator Settings > Policy Manager, except when the Windows
authentication fails.
3
You can click Do not ask again to use the most recently-saved Login user
name and password for each print job. When selected, the Policy Manager
Login dialog box does not appear again.
4
Click Log in to send the print job to the Policy Manager spooler server, where
the Login user name and password are authenticated. Otherwise you can print
directly to the printing system instead of using the Policy Manager spooler.
The print job appears in the Spooler folder in Policy Manager or in Client
Viewer. Please refer to the Policy Manager User Guide for Policy Manager and
Client Viewer details.
5
On the printing system’s operation panel, enter the Login user name and
password to print all jobs under the Login user name. You can print from any
printing system managed by the Policy Manager server.
User Settings
User Settings lets you specify user and department names, select the default
unit of measure, and change the driver display language.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
2-11 User Guide
To Next Page
Loading...
Need help?
General