5-28
Operation on the Machine > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
• Choosing from the Address Book
• Choosing from the External Address Book
For details on the External Address Book, refer to the following:
• Choosing from One Touch key.
• Choosing from the FAX
Choosing from the Address Book
Registering Destinations in the Address Book (page 3-20)
1
In the basic screen for sending, select the [Address Book] key.
2
Select the destinations.
1 [▲] [] key > [Address Book] > [OK] key
2 Select the destination.
Choosing from the Address Book (page 5-28)
Command Center RX User Guide
Choosing from the One Touch Key (page 5-30)
FAX Operation Guide
• You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen (page 8-35)
• You can specify the fax destination. Enter the other party number using the numeric keypad.
For details on the External Address Book, refer to the following:
Command Center RX User Guide
When checking information of the destination, select [Menu] > [Details] > [OK] key