6-23
Setup and Registration (System Menu) > System Menu
Administrator
[Menu] key > [▲] [▼] key > [Administrator] > [►] key
The Administrator setting is a function that identifies a user who can use the printer and manage other users.
Administrator settings (page 7-22)
Adjust/Maintenance
[Menu] key > [▲] [▼] key > [Adjust/Maintenance] > [►] key
Adjust printing quality and conduct machine maintenance.
Wired Status
[Menu] key > [▲] [▼] key > [Wired Status]
The wired network connection status appears.
Wi-Fi Status
[Menu] key > [▲] [▼] key > [Wi-Fi Status]
The wireless LAN status appears.
Item Description
ColorCalibration This machine contains a calibration function that automatically makes adjustments to
compensate for changes that occur over time due to variations in the ambient temperature and
humidity. This function can be used for fine adjustment of tone and color drift to print in the
optimum color.
Color Calibration Procedure (page 8-20)
If color tone does not improve or color drift does not improve after executing this color
adjustment, refer to the following:
Registration Procedure (page 8-21)
Registration Normal When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
Registration Procedure (page 8-21)
Registration Details
Restart Printer Restart the machine without turning the power switch off. Use this to deal with any unstable
operation by the machine. (Same as the computer restart.)
Service Setting Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
This function is displayed when the wireless network function is available on the machine.
Item Description
Wi-Fi Status Check the wireless LAN status.
NetwkName(SSID) Check the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
• This function is displayed when [Wi-Fi] is set to [On].
• Detailed information is displayed when [►] key is clicked.