IC Link for Windows
{PAGE }
Tools Menu
Multi-Part Form Creator (continued)
3. With the Multi-Part Form Creator active you can begin to configure your Multi-Part Form with the following
parameters:
a. Add Page – activates a “Multi-Part Form Page”, where the settings can be applied for each of the
pages in the Multi-Part Form. Each time you click on “Add Page” – it allows you to create a
separate page with different Cassette, Overlay, Resolution, Data/Overlay, and Stack settings.
b. Cassette
– selects the cassette from which the print page should be taken from.
c. Overlay
– assigns the PRESCRIBE macro (Customer, File, or Freight) to the cassette.
d. Resolution
– selects the PRESCRIBE and/or Laser-Jet raster graphics resolution. The resolution
of vector graphics and fonts will not be effected from this setting.
e. Data/Overlay
– The overlay can be printed out separately or with the print data.
f. Stack
– the stack position of the printer can be defined.
g. OK – will add the Cassette, Overlay, Resolution, Data/Overlay, and Stack settings to the Page.
h. Add to Project
– will build the Multi-Part form into an IC Link Project file and create a Ccpy Enable
and Ccpy Disable files (ccpy on.prn and ccpy off.prn).
4. As each Multi-Part Form Page is configured, click on the OK button for each entry. This will create an entry
under the Multi-Part Form field for each page you have configured (i.e. – Multi-Part Form Page 1, Multi-
Part Form Page 2, and Multi-Part Form Page 3)..
Multi-Part Form Page 1
Multi-Part Form Page 2
Multi-Part Form Page 3
To Next Page
Loading...
Need help?
General
