IC Link for Windows
{PAGE }
Tools Menu
EMCR Creator (continued)
3. With the EMCR Creator active you can begin to configure your EMCR Macro by selecting the Paper
Source, clicking on the “Assing Macro / modify…” button and defining the following parameters in the
“Macro to Paper Source” dialogue box :
a. Macro
– Drop down menu lists the available macros to assign to the Paper Source.
b. Parameters
– Open text field which allows additional PRESCRIBE Commands associated with the
Macro file such as resolution settings or macro positioning.
c. Repeat Count
– Allows repeat count for the Macro to be assigned.
4. As each “Macro to Paper Source” is configured, click on the [OK] button to register each setting. This will
create an entry under the Macro – Paper Source Assigner field for each Cassette you have configured
(i.e. – Cassette 1, Cassette 2, Cassette 3 etc.).
To Next Page
Loading...
Need help?
General
