Kyocera KM-NET User Manual

4
Connect the other end of the printer cable to the parallel
interface connector or serial interface connector on your
computer.
Turn the main switch to the printer back ON ( | ).
* For details on printer interface setup, see “Functions
Edition”.
To connect the printer directly to your computer, use either a parallel
cable or serial cable.
CAUTION: ALWAYS turn the main switch to the printer OFF (O)
BEFORE connecting the printer cable.
Turn the main switch located on the right side of the printer
OFF (O) and then turn the power off to your computer as
well.
Connect the printer cable to the parallel interface connector
or serial interface connector located at the back of the right
side of the printer.
2. Set-up
2-1 Connecting the printer cable
1
2
3
4

Kyocera KM-NET Specifications

General

Brand	Kyocera
Model	KM-NET
Category	Printer
Language	English