4-5
4. Selecting the Printer Settings
9 NetWare ON/OFF
Select “ON” or “OFF”, as desired, under the “Netware” setting and
then touch the “Close” key. The display will return to the [Network]
screen.
• When “ON” is selected, the Frame Type settings will be displayed.
• To cancel the setting, touch the “Back” key.
0 NetWare Frame Type
Select the desired frame type under the “Frame Type” setting and
then touch the “Close” key. The display will return to the [Network]
screen.
• To cancel the setting, touch the “Back” key.
! TCP/IP ON/OFF
Select “ON” or “OFF”, as desired, under the “TCP/IP” setting and
then touch the “Close” key. The display will return to the [Network]
screen.
• When “ON” is selected, the DHCP settings will be displayed.
• To cancel the setting, touch the “Back” key.
@ DHCP ON/OFF
Select “ON” or “OFF”, as desired, under the “DHCP” setting and then
touch the “Close” key. The display will return to the [Network] screen.
• To cancel the setting, touch the “Back” key.
# IP Address
Select “ON” under the “TCP/IP” setting.
Use the “▲” and “▼” cursor keys to select “IP Address” and then
touch the “Change” key. The [IP Address] screen will appear.
1
2
To Next Page
Loading...
Need help?
General
