23
7 • SELECTING AND STARTING A RECORDED RECIPE
7.1 • TURNING THE OVEN ON
Press knob 16 for 3 seconds. If an error code
appears on displays 715, see chapter “Self-
diagnosis and errors guide”.
7.2 • RECALLING
Press the MENU button 13, select “Interactive
Cooking” by pressing knob 16.
Turn knob 16 by selecting the recipe that
you want to recall, shown on display 15 and
confirm by pressing knob 16.
WARNING: if the recipe uses the core probe,
connect the probe to the front panel, otherwise
the error message “Probe pin error” will
appear. See chapter “Self-diagnosis and errors
guide”.
7.3 • STARTING
7.3 a •
STARTING A RECIPE WITH PRE-HEATING
If the recipe recalled includes a preheating phase, the
writing [PrE] appears on display 6.
A cyclical acoustic signal will be heard and the writing
[LoA] will appear on the display to notify that the
chamber has reached temperature.
Insert the food (if the programme has core probe
phases, insert the probe into the product).
Close the door.
Display 15 shows the second phase, indicating that the
second cooking phase has started.
7.3 b •
STARTING A RECIPE WITHOUT PRE-HEATING
Insert the food (if the recipe has core probe phases,
insert the probe into the product).
Turn knob 16, select “skip phase” and confirm by
pressing knob 16.
An acoustic signal indicates that the preheating phase
has been excluded.
Warning: pre-heating is not necessary only when the
cooking chamber has already reached temperature.
90034270rev02
To Next Page
Loading...
Need help?
General