101
24 SELF-DIAGNOSIS AND FAULT IDENTIFICATION
The main fault warning messages
are indicated on the display with the
appearance of an alarm window.
The type of fault identified is indicated
on the second line of the alarm window.
SERIOUS alarms are:
OVEN SAFETY
The oven safety thermostat has cut in.
Switch off the oven immediately and
contact a manufacturer technician or
authorized service agent.
FAN SAFETY
Fan faulty Switch off the oven
immediately and contact a
manufacturer technician or authorized
service agent.
OVEN PROBE
switch
off the oven immediately and contact
a manufacturer technician or authorized
service agent.
NO GAS
No gas. Check that the shutoff valve
is open and that there is gas coming
from the main. If there is no supply from
the main, inform the gas company or
agency. If there is no problem with the
main, contact a manufacturer technician
or authorized service agent.
OVERTEMP. EL. COMP.
An excessive temperature rise
registering in the electrical components
compartment could result in damage
to components. Switch off the
oven immediately and contact a
manufacturer technician or authorized
service agent.
CHAMBER BURNER 1
CHAMBER BURNER 2
malfunction. Switch off
the oven immediately and contact a
manufacturer technician or authorized
service agent.
INVERTER 1 OVER CURR.
INVERTER 1 GENERAL
INVERTER 1 TIMEOUT
INVERTER 2 OVER CURR.
INVERTER 2 GENERAL
INVERTER 2 TIMEOUT
Inverter malfunction. Switch off the
oven immediately and contact a
manufacturer technician or authorized
service agent.
CONDENSATION PROBE (If oven
cooking in steam or combined mode).
Vapour condensation temperature
probe faulty. The condenser is
in operation continuously, but the
oven can still be used under close
observation in convection mode until
the arrival of a service technician.
24.1 - SERIOUS ALARM
ALARM
No Gas
STOP STOP
90027560rev00
To Next Page
Loading...
Need help?
General