12
www.howdens.com
Overloaded
Full load
PULL
DOWN
Remove
screw
2 - Load the washing machine
Open the door
Open the door in case of power failure
Close the door
• Reach behind the door grip and pull the door open.
Check the drum for pets or foreign objects before
loading with laundry.
The most efficient use of energy and water is achieved
when a full load is washed. However, do not overload
as this can increase noise, affect wash performance
and shorten the machine’s service life.
• Unfold the laundry and load loosely into the drum.
Mixing both large and small items gives better wash
results and also helps distribute the load evenly during
spinning.
In case of a power failure, use the door emergency
tag to manually open the door.
• Make sure that no items are caught between the
door and the seal.
• Close the door (Do not slam closed).
Tip: Please note the maximum load for each wash
programme.
WARNING: Before opening the door, make
sure that there is no water in the machine to avoid
flooding.
Turn off and unplug the machine.
To Next Page
Loading...
Need help?
General
